Step	Title                    	Time	Command     	Command     	Cmd         	Seq         	Telemetry   	Telemetry   	Expected    	Units 	Telemetry   	Other       	Crit        	Description              	Notes       	RT 	Tlm	Min	SIM   
\# 	                         	Req (m)	Description 	Mnemonic    	EGSE        	Key         	Description 	Mnemonic    	Value       	      	EGSE        	Verifier        	              	                         	            	Con	Fmt	Alt	Pos   
   	1.6\_V2.1                	    	            	            	            	            	            	            	            	      	            	            	            	                         	            	   	   	   	      
1.0	Disable FP bakeout       	    	            	            	            	            	            	            	            	      	            	            	            	                         	            	   	   	   	      
1.1	turn off FP bakeout htr 	2   	ChangeConfigSetting 	WSBAKDSABL  	            	            	 	            	            	      	 Check cmdResult == OK 	            	A            	          	            	Y  	1or2  		      
  	     	   	 	  	            	            	 	            	            	      	commandEcho 116            	            	           	          	            	Y  	1or2  		      
1.2	disable bakeout patch    	2   	writeBep    	WBBOEN\_DIS 	            	            	 	            	            	      	 Check cmdResult == OK           	            	            	          	            	   	   	   	      
  	     	   	 	  	            	            	 	            	            	      	commandEcho 99            	            	           	          	            	Y  	1or2  		      
1.3	set warm boot flag on    	0.1   	DPA Warm Boot	1WRMBTSB(1) 	            	            	            	        	            	      	            	            	2            	                         	            	Y  	1or2  		      
1.4	Halt BEP                 	0.1   	DPA Command Reset	1RSETIRT(1) 	            	            	            	       	            	      	            	            	2            	1RSETIRT=1 holds board in reset	         	Y  	1or2  		      
1.5	Restart BEP              	0.1   	DPA Command Reset	1RSETIRT(0) 	            	            	 	            	            	      	            	            	2           	1RSETIRT=0 releases board 	         	Y  	1or2  		      
1.6 	Check BEP A Boot 	2.0 	            	            	            	            	            	            	            	     	Check bepStartupMessage:   	            	A   	   	   	 Y   	1or2 	 	 
   	                         	    	            	            	            	            	            	            	            	      	bepTickCounter $< 10$; version =??;	            	A  	   	   	      	 	 	 
   	                         	    	            	            	            	            	            	            	            	      	watchdogFlag = 0, patchValidFlag =1         	            	A   	   	   	      	 	 	 
   	                         	    	            	            	            	            	            	            	            	      	warmbootFlag = 1        	            	A   	   	   	      	 	 	 
   	                         	    	            	            	            	            	            	            	            	      	Check swHousekeeping messages:	            	   	   	   	      	 	 	 
   	                         	    	            	            	            	            	            	            	            	      	startingBepTickCounter $< 10$;            	            	B  	   	   	      	 	 	 
   	                         	    	            	            	            	            	            	            	            	      	endingBepTickCounter=  	            	B  	   	   	      	 	 	 
   	                         	    	            	            	            	            	            	            	            	      	=startingBepTickCounter+640  	            	  	   	   	      	 	 	 
   	                         	    	            	            	            	            	            	            	            	      	version =?? 	            	A 	   	   	      	 	 	 
1.7 	Check HW LEDs    	2.0  	            	            	            	      	BEP Select 	1STAT4ST    	0/1          	     	            	            	2 	0/1 indicates BEP A/B is selected 	            	 Y 	1or2   	   	      
  	   	    	            	            	            	      	BEP FIFO Not Full 	1STAT6ST    	1          	     	            	            	2 	1 means FIFO not full 	            	   	   	   	      
  	   	    	            	            	            	      	BEP FIFO Not Empty 	1STAT7ST    	0          	     	            	            	2 	1 means FIFO empty 	            	   	   	   	      
1.8 	Check SW LEDs    	2.0  	            	            	            	      	BEP initialization 	1STAT3ST    	0          	     	            	            	1 	0 means BEP SW is running 	            	 Y  	1or2   	   	      
   	   	    	            	            	            	      	Watchdog boot 	1STAT2ST    	1          	     	            	            	2 	1 means no watchdog boot 	            	   	   	   	      
   	   	    	            	            	            	      	Science run status	1STAT1ST    	1          	     	            	            	2 	1 means science idle 	            	   	   	   	      
   	   	    	            	            	            	      	  	1STAT0ST    	0or1          	     	            	            	2 	this bit toggles to indicate BEP is running	            	   	   	   	      
2.0	Start DEA HK run           	    	            	            	            	            	            	            	            	      	            	            	            	                         	            	   	   	   	      
2.1	Load Board 11 DEA HK     	1   	loadDeaBlock	WD00001024  	            	            	 	            	            	      	Check cmdResult == OK 	            	       B 	Load Fullhouse DEA housekeeping	   	Y 	1or2   	   	      
   	                         	    	            	            	            	            	            	            	            	      	commandEcho 225  	    	            	parameter block into slot 4	            	   	   	   	      
2.2	Start DEA Hkp run        	1   	startDEA    	XDZ0000005  	            	            	 	            	            	      	Check cmdResult == OK 	            	B            	get FP temp from DEA HKP data   	 	Y 	  1or2 	   	      
   	                         	    	            	            	            	            	            	            	            	      	commandEcho 18  	    	            	 	            	   	   	   	      
3.0	Drop FP to -120 C         	    	            	            	            	            	            	            	            	      	            	            	            	                         	            	   	   	   	      
3.1	set FP temp to -120~C    	2   	ChangeConfigSetting 	WSFTNEG120     	            	            	 	            	            	      	Check cmdResult == OK 	            	1            	 	            	Y  	1or2  	   	      
  	    	    	 	     	            	            	 	            	            	      	commandEcho 105  	            	            	 	            	  	  	   	      
3.2	dump system config.      	0.1   	dumpSysConfig	RS\_0000001 	            	            		            	            	      	Check cmdResult == OK  	            	      B     	  	            	Y   	1or2  	     	      
   	                         	    	            	            	            	            	            	            	            	      	            	 commandEcho 66   	            	 	            	   	   	   	      
3.3	Monitor FP temp    	30    	 	     	            	            	 	            	            	      	deaHousekeepingData  	            	A    	time depends on starting temp 	 	P  	1or2  	   	      
 	Total Time	44.4