Step	Title	Time	Command	Command	Cmd	Seq	Telemetry	Telemetry	Expected	Units	Telemetry	Other	Crit	Description	Notes	RT	Tlm	Min	SIM
\#	5.16\_V2.1              	(mins)	Description	Mnemonic	EGSE	Key	Description	Mnemonic	Value		EGSE	Verifier				Con	Fmt	Alt	Pos
1	Verify current ACIS status	    	            	            	            	            	            	            	            	      	            	            	            	                         	            	   	   	   	      
1.1	Verify HW LEDs	2					BEP Select	1STAT4ST	0 or 1				2	0/1 indicates BEP A/B is selected		Y	2		
							BEP Not in Reset	1STAT5ST	1				2	1 means BEP not in reset					
							BEP FIFO Not Full	1STAT6ST	1				2	1 means FIFO not full					
							BEP FIFO Not Empty	1STAT7ST	0				2	0 means FIFO empty					
1.2	Verify SW LEDs	2					BEP is running	1STAT0ST	0 or 1				2	bit toggles when BEP running		Y	2		
							Science run status	1STAT1ST	1				2	1 means science idle					
							Watchdog boot	1STAT2ST	1				2	1 means no watchdog boot					
							BEP initialization	1STAT3ST	0				1	0 means BEP SW is running					
2	Load eeprom_cksum into I_CACHE																		
2.1	Load eeprom_cksum		writeBep\\	WBEEPCKSUM							Verify cmdResult ==1\\commandEcho 14415					Y	2		
3	Execute eeprom_cksum with valid checksum																		
3.1	Execute eeprom_cksum		executeBep\\	XBEEPCKSUM							Verify cmdResult==1\\commandEcho 14417					Y	2		
4	Wait 4 seconds																		
4.1	Wait between commands													Commanded 4 second delay					
5	Attempt to dump EEPROM contents																		
5.1	Dump EEPROM		readBep\\	RBROMDUMP1							Verify cmdResult==3\\commandEcho 306			Command fails		Y	2		
6	Verify eeprom_cksum status 																		
6.1	Verify command status	2									bepExecuteReply==0x8e9fdcc0			Correct EEPROM checksum		Y	2		
6.2	Verify command result	2									EEPROM not dumped								
7	Execute eeprom_cksum with bogus checksum																		
7.1	Execute eeprom_cksum		executeBep\\	XBEEPBOGUS							Verify cmdResult==1\\commandEcho 14427					Y	2		
8	Wait 4 seconds																		
8.1	Wait between commands													Commanded 4 second delay					
9	Attempt to dump EEPROM contents																		
9.1	Dump EEPROM		readBep\\	RBROMDUMP1							Verify cmdResult==1\\commandEcho 306			Command succeeds		Y	2		
10	Verify eeprom_cksum status 																		
10.1	Verify command status	2									bepExecuteReply==0x8e9fdcc0			Correct EEPROM checksum